TerraMacs Mighty Mac Directional Drill
Mighty Mac Carriage Mighty Mac Carriage Mighty Mac Carriage & Boom
Mighty Mac Directional Drill Rig Carriage in production with Sub Saver mounted on Spindle Mighty Mac Carriage Rear of Carriage showing Boom swivel Mount
Mighty Mac Clamps Mighty Mac Clamps Mighty Mac Rod Box
Mighty Mac Hydraulic Breakout Clamps in production Rod Box in production with capacity for 40 x 5m rods on board.
Mighty Mac Rod Box Mighty Mac Stakedown Mast Mighty Mac Greaser Pump
Mighty Mac On Board Rod Box which stores 200m of rods. Auger Stakedown Mast in production. Rod Greaser Pump mechanism with application gun

Mighty Mac Drill Rigs are generally custom manufactured to exact customer specifications. To provide some guidance the photos herein show various drill features/options in manufacture, all of which are customisable. Please discuss your exact requirements with your local distributor or contact TerraMacs direct.

Product Features:

Driven by on board 152HP Turbo Charged Cummins Diesel Engine

Thrust/Pullback of 133,447 N with two speeds.

Torque of 6,100 Nm at 100rpm

Two speed rotation – 100 and 200rpm.

Fully Automatic Rod Loader with 40 x 5m rods on board.

Single Swivel Mast Stakedown supplied complete with 2 short and 2 longer Augers to suit various ground conditions.

On Board 1200psi (35 Gallons per minute) Bentonite Piston Pump.

Electric Strike Warning System (Zap Alert).

Rack & Pinion Thrust/Pullback mechanism

All hydraulic controls electric over oil actuated.


A Look In More Depth:

The largest Directional Drill in the TerraMacs standard products range, the Mighty Mac is designed as the ultimate rugged machine and each machine, while based on the same fundamental chassis and structure, to date has been uniquely customised to customers requirements.

Powered by a 152HP Turbo Charged Cummins Diesel engine, the Mighty Mac Drill Rig has two speed thrust/pullback and two speed rotate and is capable of jobs up to 350mm in diameter and shots of up to 200 metres in length.

Stakedown of the Mighty Mac is achieved using the swiveling single mast foot mounted at the front of the machine, which provides the ability to position it relative to the machine as best suits the job environment.

The Mighty Mac carries 40 drill rods on board, each 5m in length (total 200m) and loads and unloads these fully automatically.


Specifications:

Thrust & Pullback Newtons 133,447
Pounds 30,000
Torque & Spindle Speed Newton Metres 6100Nm at 100rpm and 3050Nm at 200rpm
Foot Pounds 4,500lbf at 100rpm and 2250lbf at 200rpm
Electric Strike Warning system Melfred Borzall Zap Alert
Hydraulic Power Pack On board Cummins 152HP Turbo Charged Diesel Engine
Fluid System On board 1200 PSI Bentonite Piston Pump to pump fluids from remote tank (not included)